Returning Customer
I am a returning customer
Register Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Congratulations! Your new account has been successfully created!
You can now take advantage of member privileges to enhance your online shopping experience with us.
If you have ANY questions about the operation of this online shop, please e-mail the store owner.
A confirmation has been sent to the provided e-mail address. If you have not received it within the hour, please contact us.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Product Description
Description: 1. Automotive body repair tools, conveniently taking and operating. 2. Each tool is high quality and good reputation from professional user. 3. Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, motorbikes, etc. 4. Scope of application:Cars, washing machines, refrigerators and other metal plane.
Specification:
| Material | Metal & Plastic |
| Color | Silver & Blue |
| Size | As the picture shows |
How to use this repair kits: 1.Clean the dent with a clean wet cloth. 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes. 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is) 4.Pull the trigger and apply the drawing gasket with extruded glue. (The 4 holes of gasket should be applied with hot melt glue) 5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres. (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter) 6.Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent. 7.Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen. 8.Clean the repaired place with a clean wet cloth.
Package Included: 1 X 2 In 1 Dent Removel T Bar Tools 18 X Glue Pulling Tabs